Help with Parts

nopdog

VIP MEMBER
Joined
Apr 24, 2017
Messages
357
Country flag
If anyone can point me in the right direction to source these two parts it would be appreciated. I’m sure the can’t be only used on the Norton.
Help with Parts

Rear brake lever.

2nd part I’m after is a 7inch black metal headlight.
Help as I’ve spent hours on the internet with no luck.
 
Thanks for that. Just realised it’s called a “toe peg” . DOH!
Now how about the headlight.
 
If anyone can point me in the right direction to source these two parts it would be appreciated. I’m sure the can’t be only used on the Norton.
View attachment 84047
Rear brake lever.

2nd part I’m after is a 7inch black metal headlight.
Help as I’ve spent hours on the internet with no luck.
Surely they aren't the damaged parts are they? I'm sure any decent machine shop could create the alloy inner in about 5 minutes and you could just find a piece of rubber hose that fits over it. The socket screw could be sourced just about anywhere. It's M6 by about 35mm I think.
 
Last edited:
If it's any help, I made the toepiece on this lever from an M6 coach bolt and a Yamaha rubber. I pushed a piece of plastic pipe inside the rubber as the hole is a bit big, then loctited the screw into the lever. It's actually much more comfortable than the Norton one as I left enough room for the rubber to rotate. If you can't find a genuine Norton one it will keep you going until you can.

 
Don‘t do this to it; it’s not clever! And you‘ll need to change your underwear. Don’t ask how I know!
 

Attachments

  • Help with Parts
    DF018119-9DA6-460D-9164-05A7749624B9.jpeg
    206.8 KB · Views: 107
Back
Top