Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Couple of things:The pockets for the through bolts in the Molnar barrels are flat and I'll use Carrillo fastener grease under the perfectly flat JSM shouldered bolt heads and on the bolt threads. Now hold onto your butts, I'm considering putting used copper crush washers under the bolt heads because they are the perfect size for the job. Jim says washers are not necessary though.To get those through bolts tightened down I have one set of 1/4 inch drive 12 pt sockets that will do the job on a 3/8 to 1/4 adapter for the torque wrench. I think those bolts are only 25 ft lbs of torque. If I did not have those sockets I would grind on one of my 3/8 sockets until it fit.
Couple of things:
The pockets for the through bolts in the Molnar barrels are flat and I'll use Carrillo fastener grease under the perfectly flat JSM shouldered bolt heads and on the bolt threads. Now hold onto your butts, I'm considering putting used copper crush washers under the bolt heads because they are the perfect size for the job. Jim says washers are not necessary though.
To get those through bolts tightened down I have one set of 1/4 inch drive 12 pt sockets that will do the job on a 3/8 to 1/4 adapter for the torque wrench. I think those bolts are only 25 ft lbs of torque. If I did not have those sockets I would grind on one of my 3/8 sockets until it fit.
