gearbox adjuster

Joined
Aug 23, 2015
Messages
188
Country flag
Hi again everyone I am slowly getting there but as I have mentioned in a previous post I am fitting a triumph box and belt drive which I have now acquired but have not a clue as to what kind of lock or even what it looks like to lock the primary adjustment so any info gratefully received a pic would be good to many thanks Chris
 
Typically an eyebolt affair with a block-headed bolt with a hole drilled in it to let the leg of the eyebolt slip through with a locknut on either side.

That top mounting bolt of the tranny passes thru the eyebolt.

Sorry the oil lines are in the way, but you can start to understand a little better maybe...

gearbox adjuster


Better still- #40 bolts through the right side mounting plate. A better mod is to install one on each side, facing opposite directions (push/pull)

gearbox adjuster
 
You are right I can't see a lot but at least it shows position, is that a triumph adjuster you are using if so did you have to alter it to fit thanks Chris
 
Back
Top