Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Hi Dave,That bottom hole in the toolbox mounts to a tab on the battery tray. Look at the tray, and you should see a bracket on the front edge that comes down about an inch and a half - that should line up with that hole. Mine is a late G15, and this tab is welded to the tray. Yours may be different, and it may be a bolt-on 'L' bracket.The third hole is a breather for the primary. I fit a breather pipe I had leftover from a battery, and fit a plastic elbow on the inside to make a sort of trap. If you look at the primary case, you'll see that there's actually an eyebrow over that hole to keep oil from splashing out as it falls off the primary chain.
Hi Dave,
That bottom hole in the toolbox mounts to a tab on the battery tray. Look at the tray, and you should see a bracket on the front edge that comes down about an inch and a half - that should line up with that hole. Mine is a late G15, and this tab is welded to the tray. Yours may be different, and it may be a bolt-on 'L' bracket.
The third hole is a breather for the primary. I fit a breather pipe I had leftover from a battery, and fit a plastic elbow on the inside to make a sort of trap. If you look at the primary case, you'll see that there's actually an eyebrow over that hole to keep oil from splashing out as it falls off the primary chain.
