Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
I don't which is better either Dave. I had one of each when I did the 750 box.Put the roller in, I'll use the MH ball bearing when I do the 850.I also simply eliminated the inner gasket to bring the kicker/layshaft within spec.Easier than shims. I used 518 for the sealant.Looking at the Shock Proof inside the case, not sure if its good or bad.Looks like a mess.Carry on Nick, you're doing well.
I don't which is better either Dave. I had one of each when I did the 750 box.
Put the roller in, I'll use the MH ball bearing when I do the 850.
I also simply eliminated the inner gasket to bring the kicker/layshaft within spec.
Easier than shims. I used 518 for the sealant.
Looking at the Shock Proof inside the case, not sure if its good or bad.
Looks like a mess.
Carry on Nick, you're doing well.
