Don't know if this is the correct thread but need some help.
Installed the decat and shorties, bike ran ok but very rich.
Did the lambada delete and bike ran crap. Reconnected the 02 sensors.
Sent the ECU away for mapping. Its the OMEX type.
Bike now runs extremely well, richness cured, idles great on startup etc.
BUT..
Sometimes the bike hunts at idle only about 200rpm sometimes slightly more. Shut the bike down and restart its fine or continue riding and it goes away.
From what I've gathered this hunting may be cured by the lambada delete.
But I think it was Richard who told me that the lambada delete may not work so well with the Omex ECU.
Or do the so called idle screw. (it was done before and was fine prior to the remapping)
I'm thinking of trying the lambada delete again and resetting the so called idle screw but am hoping that the collective brains trust may have information on a remedy.
Thanks
Simon
