Reply to thread

Message

Did the bike come with the SC Typhoon ECU ? I think you have the OMEX because of the tilt circuit unit. You either have a conversion to OMEX or you have a very late model 2015 that started using the OMEX again like a 2016 MK2 961 . I have to find this schematic. But long story short , you need to ohm out the wires leading up from the side stand . Once you find them ohm through the switch , you may have severed a wire . Go back to where you made the cut in to the TPS !

[QUOTE="TonyA, post: 611054, member: 7317"] Did the bike come with the SC Typhoon ECU ? I think you have the OMEX because of the tilt circuit unit. You either have a conversion to OMEX or you have a very late model 2015 that started using the OMEX again like a 2016 MK2 961 . I have to find this schematic. But long story short , you need to ohm out the wires leading up from the side stand . Once you find them ohm through the switch , you may have severed a wire . Go back to where you made the cut in to the TPS ! [/QUOTE]

Verification