Dyno test of 1 1/2 pipes and peashooters

Gents,

I have secured a short term loan of a Maney race system to test on the Dyno.

I would also like to test the 1 1/2 down pipes and peashooters.

Is anyone prepared to lend me a set, only short term, just long enough to Dyno test?

It would be interesting for all to see the results!

Id be very interested also in the results, I'll be making 1-1/2" header pipes ,750S style a little later for my next project but feeding into a single LeoVince oval can.

i got a brand new, repo i guess, set of stand low slung pipes here?

madass140 said:

Id be very interested also in the results, I'll be making 1-1/2" header pipes ,750S style a little later for my next project but feeding into a single LeoVince oval can.

Click to expand...

Are we talking ID or OD?

Apparently the performance of a Maney system is achieved from the design of the 2 into 1 section itself.....the tricky bit...

The ID of the outlet of the collector ?

I'm talking 1-1/2" OD of the header pipe compared to the standard 1-3/8" OD headers

give hobot your snail mail and I'll send uninstalled aluminized ceramic inside and out coated stock headers if ya'll weld a O2 sensor bung into them in a good place. Also thermo needles and I'll supply the gizmo to do it with. This will become basis of kit to pass around to help others tune up and tell us what they saw number and seat wise. Only reason I ain't used them as not enough for past Peel and look too like lawn chair tinted tubes on factory Trixie. Only a spendy racer type could love em. Hang in rafters plastic bagged so don't think rat or mud doppers clogged just spiders webs.

PM sent