Dynamic wheel balancing, worthwhile or good marketing?

mean gene said:

Stu: We need a 120mph + racer to do a product evaluation! I have run these in my touring bike seem to work but can be a pain to get in tubeless tire valve stems!

Click to expand...

Alternative to pouring them in via the core-out valve stem is to use CounterAct's "sachet" packet of beads placed inside the tire prior to mounting to wheel. The packet breaks up to release the beads within tire upon first runs.

Tornado said:

Alternative to pouring them in via the core-out valve stem is to use CounterAct's "sachet" packet of beads placed inside the tire prior to mounting to wheel. The packet breaks up to release the beads within tire upon first runs.

Click to expand...

there is that or the guys I know that use them have a bulk container and just measure out the amount prior to tire install. Either way those little F&^%$*ers get everywhere

I've been using this product for 7 or 8 years now.
The balancing is perfect, tested to 150 mph + a few times on the sportbike. For puncture seals it is most effective on tubeless, however it does work to seal punctures on tube type as well. Balancing on tube type also perfect.

Glen