DummyNator

Status
Not open for further replies.
Joined
Aug 15, 2012
Messages
159
Country flag
DummyNator. I put together this display motor from old parts, Combat cases , Atlas barrels, MK3 timing cover, cylinder head? not sure! Some new hardware, old carbs, engine plates are 090 aluminum. Deburred the terrible Norton castings!
 

Attachments

  • DummyNator
    C093F325-0727-4859-BFFC-2DE953489CDA.jpeg
    294.2 KB · Views: 294
  • DummyNator
    07550EF7-E3C6-4173-B29D-A6BFE4DEEB5F.jpeg
    298.2 KB · Views: 281
  • DummyNator
    D1847A68-0331-4E07-AF50-D188AEF4E072.jpeg
    306.9 KB · Views: 255
  • DummyNator
    AC2BD8A6-E547-4555-9E92-521978E7EE88.jpeg
    269 KB · Views: 262
  • DummyNator
    BF162092-AC4B-4FE8-9E94-584D14355098.jpeg
    263.2 KB · Views: 265
  • DummyNator
    2DBE3E81-397E-48F9-85D7-0ADBF9D268DA.jpeg
    229.7 KB · Views: 294
Real nice job!!

That is a lot of work. I started to deburr an old head I have laying around and said to myself, "The heck with that. It'll take for ever."
 
I see the problem right off No Crank!!! LOL Great job lots of work just for display
 
DummyNator. I put together this display motor from old parts, Combat cases , Atlas barrels, MK3 timing cover, cylinder head? not sure! Some new hardware, old carbs, engine plates are 090 aluminum. Deburred the terrible Norton castings!
How did you go about demurring the cases?What tools,die grinder,etc?
Thanks,Mike
 
Was the Norton logo on the timing cover painted from the factory ? :D
 
Status
Not open for further replies.
Back
Top