- Joined
- Feb 10, 2020
- Messages
- 100
Hey up Fellas
Hows it going? New Norton Owner here and wanted to introduce myself!
I bought my Domi Naked dream machine a month ago now over here in CA. [even though I couldnt ride it due to having my shoulder surgury] so just been looking at it and figuring out what I have got, and what it needs? The bikes pristine with 800 miles and runs FANTASTIC on the small test ride I managed.
After reading a lot of your storys and tips. [Thanks to Richard, Dave and Scott for advice, John for manual] I'm gonna start work on it this week and do the major first service inc head torque and valves, brake overhaul, fresh rubber, any recommended updates.
Just starting to figure out the parts aint easy to come by with no factory, or parts breakdown or part nos?
Heres my parts list so far, I think I'm right, but feel free to correct me or add anything, So looking for USA suppliers if poss?
4 x10/40 semi syn oil....the one thing thats easy haha!
1x oil filter BOSCH P-9147 ?
1 x DPW ?
2 x Trans DPW ?
1 x Valve cover gasket ?
2 x plugs CR9EB? or CR9EIX?
1 x Fuel Filter?
1x Fuel filter O ring?
1x Air Filter?
1x Ex header gaskets?
1 x Battery ? It has Lith Ion, I was gonna go Yuasa YTZ14S?
1 x Clutch cover gasket?
1 x RH Crank gasket?
1x CNW Bosch Coil Pack For 961
1x ONEO7 Spark Plug Leads 96 [any black ones out there?]
1x cam sensor? Bosch 0232103037
1x head temp sensor? Bosch 0280130026
1x oil pressure guage [probably a B/C Triumph one]
1x oil lines are hard and dry. would like to refresh using OEM hose and clips?
1x rear tank mount.
1x rear light [slight crack]
Any leads or tips would be appriciated and hopefully I can help you all as well
Cheers
Adrian
P.S. cant figure how to add pics? but my bike is on our website. canyonmotorcycles.com
Hows it going? New Norton Owner here and wanted to introduce myself!
I bought my Domi Naked dream machine a month ago now over here in CA. [even though I couldnt ride it due to having my shoulder surgury] so just been looking at it and figuring out what I have got, and what it needs? The bikes pristine with 800 miles and runs FANTASTIC on the small test ride I managed.
After reading a lot of your storys and tips. [Thanks to Richard, Dave and Scott for advice, John for manual] I'm gonna start work on it this week and do the major first service inc head torque and valves, brake overhaul, fresh rubber, any recommended updates.
Just starting to figure out the parts aint easy to come by with no factory, or parts breakdown or part nos?
Heres my parts list so far, I think I'm right, but feel free to correct me or add anything, So looking for USA suppliers if poss?
4 x10/40 semi syn oil....the one thing thats easy haha!
1x oil filter BOSCH P-9147 ?
1 x DPW ?
2 x Trans DPW ?
1 x Valve cover gasket ?
2 x plugs CR9EB? or CR9EIX?
1 x Fuel Filter?
1x Fuel filter O ring?
1x Air Filter?
1x Ex header gaskets?
1 x Battery ? It has Lith Ion, I was gonna go Yuasa YTZ14S?
1 x Clutch cover gasket?
1 x RH Crank gasket?
1x CNW Bosch Coil Pack For 961
1x ONEO7 Spark Plug Leads 96 [any black ones out there?]
1x cam sensor? Bosch 0232103037
1x head temp sensor? Bosch 0280130026
1x oil pressure guage [probably a B/C Triumph one]
1x oil lines are hard and dry. would like to refresh using OEM hose and clips?
1x rear tank mount.
1x rear light [slight crack]
Any leads or tips would be appriciated and hopefully I can help you all as well
Cheers
Adrian
P.S. cant figure how to add pics? but my bike is on our website. canyonmotorcycles.com