Y Yellow_Cad Joined Apr 2, 2008 Messages 492 Nov 5, 2009 #1 What is the correct amount of torque to use when tightening the rear axle bolt that enters from the right side on a 73 Commando? Thanks.
What is the correct amount of torque to use when tightening the rear axle bolt that enters from the right side on a 73 Commando? Thanks.
grandpaul VIP MEMBER Joined Jan 15, 2008 Messages 13,549 Nov 5, 2009 #2 Three or four "Arm-pounds" (on a 12" crescent wrench).
G GavinJuice Joined Jul 24, 2007 Messages 178 Nov 5, 2009 #3 # Rear wheel nut (dummy spindle, 1 nut) 80 ft lb. # Rear wheel spindle (one nut) 80 ft lb http://www.oldbritts.com/n_torq.html
# Rear wheel nut (dummy spindle, 1 nut) 80 ft lb. # Rear wheel spindle (one nut) 80 ft lb http://www.oldbritts.com/n_torq.html