Conrods

Chris

VIP MEMBER
Joined
Jan 21, 2008
Messages
1,092
Country flag
Hi
As many of you are, I am "pottering" lol
in the garage! Among my spares I found these! As you do! Can't remember if they were originally for the 686 Rickman 8 valve build or for the Bonnie. I built the 8 valve with a near new complete crank & rods. Didn't do the Rickman Bonnie as it ran SCRMC unsilenced & I didn't want to change it! Then the Commando came along.
They have the nuts chamfered & are substantial i.e. heavy.
Thoughts to future use?
Bigger files to big! I will follow up with a photo later.
 

Fast Eddie

VIP MEMBER
Joined
Oct 4, 2013
Messages
12,354
Country flag
They look like Nourish rods Chris.

I assume the big and little ends stock Triumph size? And that they are 6.5” centres?

If so they’ll suit someone building a hot rod ‘long rod’ Triumph motor.
 

Chris

VIP MEMBER
Joined
Jan 21, 2008
Messages
1,092
Country flag
Thanks Nige
No note with them. I think I got them for Mr Grayson.
Must have been for the 8 valve.
Never found a one piece crank I could use for that.
Still sorting nuts & bolts into boxes!
Always needed doing.
 

Top