Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
thanks, I have placed all my plates in the basket and there is about 1.7mm to the end where the spring plate sits, so I assume I can put a 3mm steel and could replace one 3.2 with a 3.6 friction to get it flush, or should I just go with the 3mm steel, I have 3 with friction pads and 2 with a bronze plate stuck to each side of a steel plate that have oil ways in the bronze area.as a matter of interest can you swap to a 4-plate clutch friction from the 5 plate. thanks again Neil
thanks, I have placed all my plates in the basket and there is about 1.7mm to the end where the spring plate sits, so I assume I can put a 3mm steel and could replace one 3.2 with a 3.6 friction to get it flush, or should I just go with the 3mm steel, I have 3 with friction pads and 2 with a bronze plate stuck to each side of a steel plate that have oil ways in the bronze area.
as a matter of interest can you swap to a 4-plate clutch friction from the 5 plate. thanks again Neil
