Checking. Are these the correct Barnett clutch plates for my bike?

Status
Not open for further replies.
Bonzo

Bonzo

VIP MEMBER
Joined
May 8, 2022
Messages
899
Country flag
'74 850 mk2

These are out of stock at AN..

andover-norton.co.uk

Motorcycle parts and spares for Norton motorbikes - Andover Norton Spare Parts - Andover Norton Motorcycles Parts - Original Andover Norton Parts

Motorcycle parts and spares for Andover Norton motorbikes: Andover Norton manufactures and supplies all Factory Spare Parts for Norton motorcycles built before 2002.
andover-norton.co.uk

The only other place I can see them (in the UK) is Moore Speed Racing...

www.moorespeedracing.co.uk

Barnett Clutch Friction Plate Kit

MOORE SPEED RACING, the south's biggest website retailer of Motorcycle clothing, helmets, parts and accessories.
www.moorespeedracing.co.uk

Not 'in stock', but 'supplied on demand'.

A much better price (and including vat), are these the correct ones?
 
Bonzo said:
'74 850 mk2

These are out of stock at AN..

andover-norton.co.uk

Motorcycle parts and spares for Norton motorbikes - Andover Norton Spare Parts - Andover Norton Motorcycles Parts - Original Andover Norton Parts

Motorcycle parts and spares for Andover Norton motorbikes: Andover Norton manufactures and supplies all Factory Spare Parts for Norton motorcycles built before 2002.
andover-norton.co.uk

The only other place I can see them (in the UK) is Moore Speed Racing...

www.moorespeedracing.co.uk

Barnett Clutch Friction Plate Kit

MOORE SPEED RACING, the south's biggest website retailer of Motorcycle clothing, helmets, parts and accessories.
www.moorespeedracing.co.uk

Not 'in stock', but 'supplied on demand'.

A much better price (and including vat), are these the correct ones?
Click to expand...
No they are not the correct ones
Unless they use a generic photo of course
What is wrong with your clutch?
 
It's a sample image - 'plates may differ'.

Nowt wrong with the clutch baz, maybe slightly heavy but perhaps swapping a plate for a 3mm RGM might help with that.

I just want to be aware of what's needed (and available) should I discover anything needing replacing when I go in.
 
Same SKU #
Correct..and out of stock currently
 

Attachments

  • Checking. Are these the correct Barnett clutch plates for my bike?
    Screenshot_20230327-193959_Brave.webp
    122.4 KB · Views: 151
Bonzo said:
It's a sample image - 'plates may differ'.

Nowt wrong with the clutch baz, maybe slightly heavy but perhaps swapping a plate for a 3mm RGM might help with that.

I just want to be aware of what's needed (and available) should I discover anything needing replacing when I go in.
Click to expand...
I have a Maney belt drive kit, lovely stuff, but the clearances on the outer splines on the clutch drum are just a tad tighter than the standard steel one. I also bought a 3mm steel plate from RGM to adjust the stack height, but it does not fit the Maney hub. Fine on the Norton one though, so there's a bit of work ahead with a file.
 
Status
Not open for further replies.
Back
Top