maylar
VIP MEMBER
- Joined
- May 13, 2007
- Messages
- 4,213
I've had my Commando since new, but I can't remember what the factory used for securing wires and cables to the frame and handlebars. I've been using standard nylon tie-wraps but they tend to be too narrow and dig into the cable and mar the frame after time.
The places where I have issues are securing the control wires to the handlebars, the tail light wire bundle on the rear frame loop, and the speedo cable to the lower frame. The latter is the most problematic, as the cable moves with the swingarm.
I've just painted my frame and have no desire to scuff it up again, so I ask what did the factory use and what do you guys use?
Thanks
The places where I have issues are securing the control wires to the handlebars, the tail light wire bundle on the rear frame loop, and the speedo cable to the lower frame. The latter is the most problematic, as the cable moves with the swingarm.
I've just painted my frame and have no desire to scuff it up again, so I ask what did the factory use and what do you guys use?
Thanks