Hi,
First update in a while. Making progress, and I test fitted the wheels for fitment. I somehow managed to lace the wheels properly with the correct offsets. My front fender stays will need some persuasion as they don’t fit the fender properly. I also realized I forgot to order fender stay bolts.
Front brake calliper is completely rebuilt, and I realized my front brake hose is too short. I will need to order a new one.
Upon spinning the rear wheel, I had some conflict in my rear brake drum. It turned out I did not screw the brake pad bolts down hard enough, and they were catching. The adjustment was made, it it now spins freely.
Belt drive is installed, I did my best with two pieces of angle aluminum to ensure it is lined up correctly. We shall see when I test it.
With the rear wheel now removed, I’m now turning my attention to the electrical and oil line plumbing. The holidays have been kind with time to wrench!
Also, I was given a picture over the holidays of my family home in Yarmouth Nova Scotia taken in 1975 (2 years before I was born). Check out what my Dad had parked on the lawn!
All the best,
Gatsby[ATTACH=full]102395[/ATTACH][ATTACH=full]102396[/ATTACH][ATTACH=full]102397[/ATTACH][ATTACH=full]102398[/ATTACH][ATTACH=full]102399[/ATTACH]
