Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Hi Bernahrd, so some feedback:yes the timing was way out , but it was not at the start .....why? after a full Sunday afternoon, I had found the cam ring was loose in the body , and when I took of the ally cover it protudes (just my guess!) and then get out the from that pion which locate it , thus the cam ring was out its place .........! cannot find another reason, so I refit it in the right place , retime the mag at 30° (commando piston), with the degree wheel, and was sure it will start ..........no way!so today, I play again with the .04mm drill , and carb cleaner , I had tried different float heights , first above the bow level as recommended by Bushman one carb was flooding , then just at the same level , but now the tickler are too short.........end of the session for today !
Hi Bernahrd, so some feedback:
yes the timing was way out , but it was not at the start .....why? after a full Sunday afternoon, I had found the cam ring was loose in the body , and when I took of the ally cover it protudes (just my guess!) and then get out the from that pion which locate it , thus the cam ring was out its place .........! cannot find another reason, so I refit it in the right place , retime the mag at 30° (commando piston), with the degree wheel, and was sure it will start ..........no way!
so today, I play again with the .04mm drill , and carb cleaner , I had tried different float heights , first above the bow level as recommended by Bushman one carb was flooding , then just at the same level , but now the tickler are too short.........end of the session for today !
