My original plan was that since I wanted the glass out to clean as it was fogged up, I
would open it up, pull off the needle indicator and lubricate.
Then a little brake clean slightly dissolved the small letters at bottom of dial.
I hoped to get a replacement but not easy so I decided to not pull the needle indicator
as dial is not really that bad. So I just lubed the mechanism without pulling the needle indicator.
I am really happy with the result as needle indicator does not waver any more.
I would suggest to all that the speedo and tach are easy to service, lube and restore
to non wavering needle indicator without pulling the needle indicator.
In addition, I would suggest that the installation of a new bezel is really easy and does
not really need any specilized tools or a rebuilder. I would say that bezel install and crimping
took me 10 minutes. The specialty tool required is a wood clamp!
Dennis
w=Who will now redo the speedo that is wavering despite a new cable.
