Alloy Rims

Status
Not open for further replies.
B

Baldrick

Joined
Oct 17, 2007
Messages
82
Howdy All,

I am upgrading my 850 19" rear wheel to a WM3 non valanced 19" 40 hole rim and stainless steel spokes.

After 7 weeks the wheel builder has told me he hasn't got any and more are 5 weeks away!

Can anybody tell me were to get quality 19" WM3 alloy non valanced 40 hole rim?

I will try to get one flown out myself.

cheers
 
Don't tell me you got sucked into East Coast Wheel?

tsk tsk tsk...
 
http://www.buchananspokes.com

I used Buchanans. When I did mine I sent my Avons to them along with the hub of course and back came a pretty fine product. They were timely and the work was first class. Of course the don't walk backwards to pick up their check either. But value costs money.

One other thing I did that I was glad of was to send the rear hub off to Colorado Norton Works for one of their conversions. It turned out very nicely.

Hope this helps.
 
Last edited by a moderator:
ASANDERSEN said:
http://www.buchananspokes.com/rims.htm

I used Buchanans. When I did mine I sent my Avons to them along with the hub of course and back came a pretty fine product. They were timely and the work was first class. Of course the don't walk backwards to pick up their check either. But value costs money.

One other thing I did that I was glad of was to send the rear hub off to Colorado Norton Works for one of their conversions. It turned out very nicely.

Hope this helps.
Click to expand...

My experience almost exactly. Send hubs to CNW then onto Buchanan for lacing and new Excel rims.

I'm sending Buchanan my wheels for my Triumph chop as well.
 
:roll: grandpaul,
I was going to send my rims to East Coast Wheels until I read your post!!
What's up with East Coast that I NEED to know about?????
Stan.
 
Status
Not open for further replies.
Back
Top