adjusting "adjustable" isolastic on 850

Have a 74 850 with unknown brand adjustable isolastic on front. Several holes visible when Right outer rubber pried back. Which way do I screw it to loosen the runnning clearance/play?
Thanks
Doug

Douglass Harroun said:

Have a 74 850 with unknown brand adjustable isolastic on front. Several holes visible when Right outer rubber pried back. Which way do I screw it to loosen the runnning clearance/play?

Click to expand...

It should be normal RH thread, so counterclockwise to loosen if you are looking at it from the RH side, but note that unless it's the Hemmings type vernier you will need to loosen the Iso. through-bolt first, before making the adjustment.

Tightening the Iso. bolt can alter the play so tighten down in two or three stages and check the play at each stage.