961 and V4 Parts supplier

glb

VIP MEMBER
Joined
Sep 21, 2015
Messages
393
Country flag
As I wanted to change my Dominator around I did some research and found that http://www.ritchie-engineering.co.uk were responsible for some machined parts for both the 961 range and the V4 range. (There were several V4 alloy swingarms lying around). I was able to purchase a new top yoke for mine and they also arranged for http://www.mansfield-anodisers.co.uk to do their magic. Parts are very reasonably priced and if they don't have something in stock they can make just about anything. They were so helpful it restored my faith in human nature (Well nearly). I think we should build a list of suppliers such as these as we will all need to be able to obtain parts in the future. Regards G
 
Hello Again GLB , This is good news . I hope the Norton Suppliers with let themselves be known to us so we can buy parts.
 
I just checked their site, lots of the pics depict Norton parts. Under the CNC section I'm pretty sure the photo of the hand lever is the same as the billet levers supplied with the anniversary models, handy to know if you drop the bike ad a lever gets bent!
 
Back
Top