2015 Dominator Stem Nut

glb

VIP MEMBER
Joined
Sep 21, 2015
Messages
392
Country flag
Hi I have looked through the forum and maybe I am just dumb but everyone states that the stem nut is 25mm. I also checked the manual which is the same I ordered a new one which arrived today and when I tried to fit it it was obviously too small. I do not have a vernier. Can someone point me in the right direction. Do the upside down forks have a different size nut or do you think I have been sent the wrong one. Thanks Graham
 
USD and RWU forks both have 25mm stems Use a straight edge , You measure the diameter from peak to peak on the bolt thread 25 mm . If it is off by 1mm you can measure that . The nut flat to flat is 37mm on my bike . Is it way too small , not even close ? Measure the ID of the nut , you may have the WRONG NUT or if close wrong thread !
 
Last edited:
Hi Tony Thanks for the advice, When I finish my home chores that is now on my list!
 
Well after measuring it would appear that I have been sent a 23mm but. Thanks again for the advice/instructions Tony.
 
2015 Dominator Stem Nut
2015 Dominator Stem Nut
2015 Dominator Stem Nut
2015 Dominator Stem Nut

Are you talking about these nuts or
2015 Dominator Stem Nut


This nut?
2015 Dominator Stem Nut


Or DIETZ nuts
2015 Dominator Stem Nut
 
Back
Top