Reply to thread

Message

Went to the auto parts store and purchased some paper gasket material and made my own gearbox inner cover gasket. It came out real good, very satisfactory. I reassembled the gearbox, clicked through ALL the gears then filled with gear oil. Finished assembling everything else and took it for a ride. Everything works great! The clutch is an easy pull with smooth gear changes up and down. The bike handles well and the brakes feel good too. The engine runs strong with a 1400 RPM idle. I only rode for about a half hour cause it is dark and the deer are thick around here. I counted five in that little bit of time. Tomorrow is supposed to be a beautiful day weather wise and I expect I’ll be riding with a great big smile on my face. Thanks to all that have helped me on this journey, I couldn’t have done it without you all. Be safe and happy riding!

[QUOTE="Larry S, post: 545417, member: 10808"] Went to the auto parts store and purchased some paper gasket material and made my own gearbox inner cover gasket. It came out real good, very satisfactory. I reassembled the gearbox, clicked through ALL the gears then filled with gear oil. Finished assembling everything else and took it for a ride. Everything works great! The clutch is an easy pull with smooth gear changes up and down. The bike handles well and the brakes feel good too. The engine runs strong with a 1400 RPM idle. I only rode for about a half hour cause it is dark and the deer are thick around here. I counted five in that little bit of time. Tomorrow is supposed to be a beautiful day weather wise and I expect I’ll be riding with a great big smile on my face. Thanks to all that have helped me on this journey, I couldn’t have done it without you all. Be safe and happy riding! [/QUOTE]

Verification