Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
The outer end of the quadrant could possibly be one tooth too high but due to the camera angle with the quadrant at the neutral position, it's difficult to say as the quadrant should be checked with the camplate at the 4th gear position so a pic in 4th gear with the camera level with the stud would be more useful.[ATTACH=full]91945[/ATTACH]Edit: Pic shows the oil filter housing locking plate tabs not bent up against the bolt flats.
The outer end of the quadrant could possibly be one tooth too high but due to the camera angle with the quadrant at the neutral position, it's difficult to say as the quadrant should be checked with the camplate at the 4th gear position so a pic in 4th gear with the camera level with the stud would be more useful.
[ATTACH=full]91945[/ATTACH]
Edit: Pic shows the oil filter housing locking plate tabs not bent up against the bolt flats.
