1969 bsa R3 parts placement

Joined
Nov 29, 2018
Messages
14
Country flag
I'm finally getting around to the re-assembly of my 69' R3. it's been so long ago I'm having trouble remembering things. Where does the Zener diode get mounted along with the regulator and horn relay.
I'm thinking a couple of these could go on the tool box top but I'm not sure. Then there is the condenser pack location? I'm going to install a Boyer so I won't need it but it will be there for show anyway.
Been a long while since I've been here ,,,, my how this forum has changed :)
 
DA,,,,,,, placed the Zener up front but still nothing else. Got the oil tank in and a couple other small pieces attached...
 
The R3 used the A65 frame but modified, you could look at the A65 from the same year to give you a clue, its not going to be 100% definitive but in the absence of any other info at least its a start. For 69 both the B44 and A50/A65 had the Zener mounted on a finned heat sink that was bolted to the underside of the fork bottom yoke.
 
Got things figured out now thanks to all the suggestions given here and on triples online ,,,,,,,, the manuals help but not always complete. Cheers !! …….
 
I'm finally getting around to the re-assembly of my 69' R3. it's been so long ago I'm having trouble remembering things. Where does the Zener diode get mounted along with the regulator and horn relay.
I'm thinking a couple of these could go on the tool box top but I'm not sure. Then there is the condenser pack location? I'm going to install a Boyer so I won't need it but it will be there for show anyway.
Been a long while since I've been here ,,,, my how this forum has changed :)
,,,solved
 
Back
Top