Reply to thread

Message

I’ve recently gotten around to digging out the old wiring harness that was removed when my Atlas was dismantled ( I bought it apart ). It’s not in the greatest shape but it is all there. There is a Lucas rectifier and a Zener Diode mounted on a double sandwiched aluminum disk that is roughly 3” in diameter. Here’s the questions
1. Do you stick with this system?
2. Where was the Zener Diode and rectifier originally located?

I purchased a new Lucas harness from RGM and it is configured for the original set up thus some amount of revision would have to occur if I used one of the current voltage regulators that are available

Thanks all

[QUOTE="jms, post: 654349, member: 278"] I’ve recently gotten around to digging out the old wiring harness that was removed when my Atlas was dismantled ( I bought it apart ). It’s not in the greatest shape but it is all there. There is a Lucas rectifier and a Zener Diode mounted on a double sandwiched aluminum disk that is roughly 3” in diameter. Here’s the questions 1. Do you stick with this system? 2. Where was the Zener Diode and rectifier originally located? I purchased a new Lucas harness from RGM and it is configured for the original set up thus some amount of revision would have to occur if I used one of the current voltage regulators that are available Thanks all [/QUOTE]

Verification