Norton Commando
Jerrydoe.com  Forum Home  Norton Commando Forum  Photos  [FAQ]  [Search]  [Memberlist]   
 [Profile]  [Check your private messages]  [Register]  [Log in] 
Installing Norton Steering Damper Bracket Kit

 
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles.
View previous topic :: View next topic  
Author Message
t-lil



Joined: 24 Jan 2008
Posts: 11

PostPosted: Tue Aug 12, 2008 4:55 pm    Post subject: Installing Norton Steering Damper Bracket Kit Reply with quote

Hi there...just wondering if anyone has experience installing the steering damper bracket kit sold by old britts. It's the original Norton product. The instructions are a little vague...if someone has some pictures of one installed that would be great!

thanks

t
Back to top
Dr_Hiller



Joined: 09 Oct 2004
Posts: 141
Location: Seattle, WA USA

PostPosted: Tue Aug 12, 2008 6:21 pm    Post subject: Reply with quote

Is it this type?




(Note to self, clean yer bike!)
Back to top
t-lil



Joined: 24 Jan 2008
Posts: 11

PostPosted: Tue Aug 12, 2008 6:33 pm    Post subject: steering damper Reply with quote

Hi...yes that looks like it. there are just some brackets on the otherside and the middle that are a bit strange. here is a link to the one I got and some instructions.

http://www.oldbritts.com/13_064247.html

thanks so much!...if it is the same...maybe you could send some pics of the middle and other side....I appreciate it!!

t
Back to top
batrider



Joined: 09 Aug 2008
Posts: 34
Location: Upper Black Eddy, PA USA

PostPosted: Wed Aug 13, 2008 6:43 am    Post subject: Reply with quote

I have this kit on my roadster also and can take some pix when I get home if you still need them. The instructions show how the skinny center screw and it's bracket are supposed to go. I think this is there to reduce flex on the frame tubes but a lot of people don't bother with it. (I have it installed.) Mine is mounted on the left side but it doesn't really matter.
Russ
Back to top
Dr_Hiller



Joined: 09 Oct 2004
Posts: 141
Location: Seattle, WA USA

PostPosted: Wed Aug 13, 2008 7:39 am    Post subject: Reply with quote

Here's one from the front (guess I don't have the center bolt mentioned by Russ).


Here's one from the other side.


If the edges are as sharp as they were on mine, I'd recommend chamfering the inside edges of the mounting bracket. (see the scratches in the powder coat?)

Hope this helps.
Back to top
t-lil



Joined: 24 Jan 2008
Posts: 11

PostPosted: Wed Aug 13, 2008 10:31 am    Post subject: steering damper Reply with quote

Hi guys...thanks for the info. Russ do you think the center bolt is recommended? If you have a pic that shows the center bolt connection that would be great.

thanks!!

ture
Back to top
L.A.B.
Moderator


Joined: 20 Nov 2004
Posts: 1842
Location: Norfolk, UK

PostPosted: Wed Aug 13, 2008 11:06 am    Post subject: Reply with quote

Dr_Hiller,

Whenever I've seen those damper kits fitted, the plate was fixed ahead of the frame tubes, and the semi-circular clamps behind them, with the damper on the left side, as the Old Britts fitting instructions shows it?: http://www.oldbritts.com/image/13_064247b.gif
http://www.oldbritts.com/13_064247.html
Back to top
t-lil



Joined: 24 Jan 2008
Posts: 11

PostPosted: Wed Aug 13, 2008 3:59 pm    Post subject: Reply with quote

thanks for the help guys. yes, I know how it's supposed to fit. The only concern was the center bolt...which I have left off for the boyer blocks the hole it's supposed to go through. Just took it for a spin, feels great

thanks

t
Back to top
Dr_Hiller



Joined: 09 Oct 2004
Posts: 141
Location: Seattle, WA USA

PostPosted: Wed Aug 13, 2008 4:40 pm    Post subject: Reply with quote

LAB:

It was on the left side of the bike when I bought it as well. I asked if it mattered and was told that t would make no difference, so I moved it.

I put it on the throttle side thinking that if I ever needed to adjust it on the fly, I'd just pull in the clutch and reach for it with my throttle hand. It's the same reason I've got my reserve gas tap on that side.

Never actually don't either "on the fly" so I don't know if my theory hold water, but there it is.
Back to top
batrider



Joined: 09 Aug 2008
Posts: 34
Location: Upper Black Eddy, PA USA

PostPosted: Wed Aug 13, 2008 6:11 pm    Post subject: Reply with quote

Here's a pic of mine with the center bolt. It was installed back in '74 so looks like there's a bit of rust now!



The goop on the coils keeps my electrics from drowning during hard rains. It is a RevTech coil with a Boyer firing it.

Russ
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles. All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

The Unapproachable Norton Commando

At the end of 1967 the Norton Commando was announced.

The Norton Commando was greeted with a certain amount of scepticism because on first sight the commando appeared to comprise of the old Norton Dominator twin cylinder engine mounted at an inclined angle in a set of new cylinder parts.

It was not realized that the new Norton Commando Isolastic method of engine suspension damped out all engine vibration and produced a machine which had uncanny smoothness for a vertical twin. In due course the critics were silenced and the Norton Commando had the distinction of being regarded as the first of todays so called superbikes. There can be little doubt that the original design concept of the Norton Commando has proved correct, since comparatively few modifications of any real consequence have been made since production commenced during 1968.

Now nearly 40 years later Norton Commando riders like us are a breed of our own, and as far as we are concerned its still more fun to go for a blat on the old Norton Commando, and fast. As a Norton Commando owner and enthusiast, my goal here is to promote and give credit to those who keep the Norton name going.

It is more deserving to give credit to the Commando itself, for after all these years it continues to be respected. The original Commando designers like John Favill are those who deserve the credit for developing this incredible motorcycle.

The Norton Commando Roadster and Interstate of the late seventies, never died. Although the Norton Villiers factory dispersed the tradition lived on. Today Kenny Dreer in the USA is developing the new 952 CC Norton. What a great looking bike this is, and its engineering is still based on the original layout. It will be interesting to see how the new 952CC Norton does in todays tough motorcycle market. One thing is for sure, I would own one if I could afford it.