Norton Commando
Jerrydoe.com  Forum Home  Norton Commando Forum  Photos  [FAQ]  [Search]  [Memberlist]   
 [Profile]  [Check your private messages]  [Register]  [Log in] 
MKIII conversion on a 70 750
Goto page Previous  1, 2
 
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles.
View previous topic :: View next topic  
Author Message
bill



Joined: 01 Jun 2003
Posts: 131
Location: Orlando Fl/Shady Valley Tn.

PostPosted: Thu Aug 14, 2008 3:32 pm    Post subject: Reply with quote

The chopper that I built kept the swingarm so I did not run into the problems that you are facing. you might look at AMR with how they did there featherlastic.
I think you are on the right track by having to limit the rearward pull that the chain will put on the mounts.

windy
Back to top
whiskytango



Joined: 11 Aug 2008
Posts: 6
Location: Missoula, MT

PostPosted: Sun Aug 17, 2008 2:22 pm    Post subject: Reply with quote

Thanks again for all of the input folks. I tracked down a local fellow who built a Norton chopper that is a hardtailed original frame. His claim is that he has never had any problems with the chain on his bike. He runs an O-ring chain and keeps it very tight. He's running a sportster rear on it. He built it 10 years ago and states he's put quite a few miles on it, drag raced it, and hasn't yet had a single problem with regards to the chain. I might just throw this baby together and see what happens haha! I'll keep ya'll posted.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles. All times are GMT - 8 Hours
Goto page Previous  1, 2
Page 2 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

The Unapproachable Norton Commando

At the end of 1967 the Norton Commando was announced.

The Norton Commando was greeted with a certain amount of scepticism because on first sight the commando appeared to comprise of the old Norton Dominator twin cylinder engine mounted at an inclined angle in a set of new cylinder parts.

It was not realized that the new Norton Commando Isolastic method of engine suspension damped out all engine vibration and produced a machine which had uncanny smoothness for a vertical twin. In due course the critics were silenced and the Norton Commando had the distinction of being regarded as the first of todays so called superbikes. There can be little doubt that the original design concept of the Norton Commando has proved correct, since comparatively few modifications of any real consequence have been made since production commenced during 1968.

Now nearly 40 years later Norton Commando riders like us are a breed of our own, and as far as we are concerned its still more fun to go for a blat on the old Norton Commando, and fast. As a Norton Commando owner and enthusiast, my goal here is to promote and give credit to those who keep the Norton name going.

It is more deserving to give credit to the Commando itself, for after all these years it continues to be respected. The original Commando designers like John Favill are those who deserve the credit for developing this incredible motorcycle.

The Norton Commando Roadster and Interstate of the late seventies, never died. Although the Norton Villiers factory dispersed the tradition lived on. Today Kenny Dreer in the USA is developing the new 952 CC Norton. What a great looking bike this is, and its engineering is still based on the original layout. It will be interesting to see how the new 952CC Norton does in todays tough motorcycle market. One thing is for sure, I would own one if I could afford it.