jms
VIP MEMBER
- Joined
- Jul 26, 2005
- Messages
- 183
Hi all,
Just finished rebuilding my " NA" AMC gearbox with new bearings and o rings and have re-assembled all of the gears and camplate. Before installing the inner cover I noticed that the kickstarted would not rotate counterclockwise. I have included a photo of the situation. The problem seems to revolve around the pawl and it's relationship to its stop. If I depress the spring loaded pawl, then the shaft does move but then the outside diameter of the actual kickstart body runs into the stop.
What am I missing? Thanks
Just finished rebuilding my " NA" AMC gearbox with new bearings and o rings and have re-assembled all of the gears and camplate. Before installing the inner cover I noticed that the kickstarted would not rotate counterclockwise. I have included a photo of the situation. The problem seems to revolve around the pawl and it's relationship to its stop. If I depress the spring loaded pawl, then the shaft does move but then the outside diameter of the actual kickstart body runs into the stop.